- Home
-
Shop
- Specials
- Request
- Resources
- OAKTREE TV
- About
- Home>
- Catalog>
- Diagnostic Equipment & Supplies>
- Audiometers>
- Diagnostic Audiometers>
- Amplivox Model 240 Portable Diagnostic Audiometer
Amplivox Model 240 Portable Diagnostic Audiometer
Product Code: AMPLIVOX240
- Portable diagnostic audiometer with air and bone conduction capabilities (no speech) packaged with calibrated DD45 headphones and B71 BC vibrator
- Frequency range: 125 Hz - 8000 Hz
- Talk-over feature (operator's voice routed from microphone located on audiometer's front panel to patient headset when TALKOVER button pressed and held down)
- Patient response button included
- Signal specifications
- step size: 5dB steps
- type: tone or warble
- mode: continuous or pulsed
- Noah compatible
- Automatic threshold retention feature stores thresholds for printing immediately post screening (printer sold separately) or transfer to PC (required USB cable sold separately)
- Automatic air conduction threshold recording allows audiometer to capture AC thresholds when patient responds two out of three times to a tone manually presented at the same level and frequency
- Amplivox ampliSuite software (included) allows data to be transferred to a computer (to view, annotate, and/or print); requires designated USB cable (not included)
- Includes soft carrying case
- Lightweight (1.62 lbs) and compact (10.63" L x 6.5" W X 2.37" H)
- Optional upgrades that must be requested at initial order
- Insert Earphone: Unit is packaged with DD45 Headphones (*IP30 Insert Earphones can be substituted for no additional charge when requested at time of initial order); If both DD45 headphones and IP30 inserts are desired, add IP30 inserts to order (item 8101884)
- Connection for Sanibel MPT-II thermal printer. Able AP1300 printer also compatible
- Battery Power Capability: may be specified to operate with four (4) 1.5V C batteries for 6-8 continuous hours of use (NOTE: cannot retrofit current audiometers & must be specified at initial order)
- For screening audiometer with air conduction only capabilities, see Amplivox Model 116 and Model 170
- For portable diagnostic audiometer with air, bone & speech capabilities, see Amplivox Models 260, 270, 270+ and 270+B
- Three year warranty
- (1) Amplivox Model 240 portable audiometer
- (1) set of DD45 standard audiometric headphones
- IP30 insert earphones can be substituted for no additional charge at time of initial order
- To order IP30 inserts in addition to DD45 headphone, add item# 8101884 to order
- (1) RadioEar B71 bone vibrator headset
- (1) patient response button
- (50) audiogram screening cards
- (1) USB that includes user manual & Amplivox ampliSuite
- (1) main power adapter
- (1) carrying case
- (1) calibration certificate
Things to Know Before you Buy
Amplivox requires a code for calibration
Amplivox requires a code for calibration for technicians to gain access to perform calibration. While these are calibrated when sold through Oaktree Products, the code is not made available to Oaktree Products at the time of sale. When the time comes for the annual calibration, a code is required to initiate the process. If you are in need of a code, Oaktree Products is more than happy to work on your behalf. Contact Oaktree Products with the serial number of your Amplivox unit; we will contact Amplivox, obtain the necessary calibration code, and forward the information directly to you. The calibration code should be valid for the lifetime of the device.